E4
Produced by injection moulding techinique from special PU material, our E4 piston seal is designed specially for pneumatic cylinders with its dynamic sealing lips (external sealing lips) having shorter height. It provides a safe static sealing when its internal sealing lips are installed in housing.
E4
Technical Data
Pressure: Static applications without back-up ring ≤ 500 Bar
Temperature: -35°C to +80°C
Speed: ≤ 1 m/s
Hardness:70 ∓ 3 Shore A°
Media: Air (Lubrication free, pressurized dry air)
Material
Material: PU
Color: Turquoise
Advantages:
No danger of corrosion
Low friction values and high length of operation
Suitable for use in dry as well as oil-free air after initial assembly lubrication
EU
Produced by indection moulding technique with secial PU material, our EU PU combi seals perform an absolute sealing with its dynamic nutring sealing lips and its joint dust (wiper) lips. It is provided to be easily assemblied into special design open seal housing.
EU
Technical Data
Pressure: Static applications without back-up ring ≤ 500 Bar
Temperature: -35°C to +80°C
Speed: ≤ 1 m/s
Hardness:93 ∓ 2 Shore A°
Media: Air (Lubrication free, pressurized dry air)
Material
Material: PU
Color: Turquoise
Advantages:
No danger of corrosion
No dust corners
Low friction values and high length of operation
Suitable for use in dry as well as oil-free air after initial assembly lubrication
PP
Produced by injection moulding techinique from PU material, our PP can be used safely in the applications requiring cushioning seals in pneumatic cylinders.
PP
Technical Data
Pressure: Static applications without back-up ring ≤ 500 Bar
Temperature: -35°C to +80°C
Speed: ≤ 1 m/s
Hardness:90 ∓ 2 Shore A°
Media: Air (Lubrication free, pressurized dry air)
Material
Material: PU
Color: Turquoise
Advantages:
Optimum use of design-related cushion travel
High cushioning consistency due to automatic centering, enen in the case of misalignment
of the cushioning spear to the cylinder head
Z8
Designed specially for the cases necessary for sealing of very small areas in short stroke pneumatic cylinders, our Z8 type seals provide maximum sealing with its small housing measures and minumum friction force.
z8
Technical Data
Pressure: Static applications without back-up ring ≤ 500 Bar
Temperature: -35°C to +80°C
Speed: ≤ 1 m/s
Hardness:70 ∓ 3 Shore A°
Media: Air (Lubrication free, pressurized dry air)
Material
Material: PU
Color: Turquoise
Advantages:
Good sealing performance in small installation grooves
Low static and dynamic friction
High functional reliability due to lip seal design.
Also suitable for cylinders with cushioning
ZHM
Designed specially for the cases necessary for sealing of very small areas in short stroke pneumatic cylinders, our ZHM type seals provide maximum sealing with its small housing measures and minumum friction force.
ZHM
Technical Data
Pressure: Static applications without back-up ring ≤ 500 Bar
Temperature: -35°C to +80°C
Speed: ≤ 1 m/s
Hardness:75 ∓ 3 Shore A°
Media: Air (Lubrication free, pressurized dry air)
Material
Material: PU
Color: Turquoise
Advantages:
High functional reliability due to lip seal design.
Low static and dynamic friction
Easy installation